Impulse 520W - Manual (Page 75)

Connector Pin Outs
SeaI/O (RS-232) S-Series Modules
SeaI/O S-Series (RS-232) modules have an RJ45 connector on the face of the
enclosure. Each S-series module includes a kit (item# KT119) to convert the RJ45
RS-232 pin out to a standard DB9 RS-232 pin out. The kit ships with a DB-9F to
RJ45 modular adapter (item# DB109) with RS-232 pin out and a standard 7' CAT5
patch cable (item# CA246). This kit allows SeaI/O S-series modules to be easily
connected to a standard DB9 RS-232 serial port. For other interfacing options, the
RJ45 serial pin out is shown below.
NOTE: For SeaI/O S-series modules, pin 4 of the RJ45 connector outputs
5VDC @300mA. This is useful for powering the wireless
Bluetooth adapter (Sealevel Item# BT-SD100). This allows any
Bluetooth capable host to access a SeaI/O module as easily as
communicating with a standard RS-232 serial port.
© Sealevel Systems, Inc. - 72 - SeaI/O User Manual