Impulse 7161 - Manual (Page 4)

Installation
Sealevel Systems COMM+16.PCI Page 2
Installation
Operating System Installation
For Windows Users
Start by choosing Install Software at the beginning of the CD. Choose Asynchronous COM: Port Software,
SeaCOM.
Other Operating Systems
Refer to the appropriate section of the Serial Utilities Software.
System Installation
The COMM+16.PCI is a universal PCI implementation and can be installed in any 5V or 3.3V slot of the PCI
expansion slots.
1. When running Windows 9x/NT install software before installing adapter.
2. Turn off PC power. Disconnect the power cord.
3. Remove the PC case cover.
4. Locate an available PCI slot and remove the blank metal slot cover.
5. Gently insert the COMM+16.PCI into the slot. Make sure that the adapter is seated properly.
6. Replace the screw.
7. Replace the cover.
8. Connect the power cord.
Installation is complete.