Laurel Electronics Laureate XLog Datalogging Software - Manual (Page 18)

- - 18 -
6. LOGGING PROGRAM
The Program screen displays all of the Meter faces selected for display in 4 groups of
either 16, 9, 4 or 1 as selected on the Settings screen.
Before logging to file, make one of three selections presented in the upper right of the
screen: 1) Overwrite any existing data (erases file before writing), 2) Append data with
Header, or 3) Append data without Header.
Click on ‘Start Logging’ to start logging to file.
Click on ‘Stop Logging’ to stop logging to file.
Click on ‘Single Log’ to log individual records on command.
The readings on the Meter faces are updated continuously whether logging is in process,
but they may be held by checking the ‘Display Hold’ box. When the box is unchecked, the
readings begins updating again. The status of this check box has no effect on the logging
process.
The total number of alarms is shown in a red box for the selected Group. The number of
alarms is shown even for the tabs whose Meters are currently hidden.