Approach Tech Appro IP Camera LC-7314 - Manual (Page 30)

28
5.1.2 Change Image Setting
Please follow the steps below to change the image setting through the network if necessary.
1. Click the Image button on the home page to enter the image-setting page.
2. Adjust the image setting including “Device Title” and “Viewer Type” if necessary.
3. Click the Submit button to submit the new image setting.
4. Click the Multi Profile button to enter the MultiProfile image-setting page. Select an ID (1-6)
from the drop-down list then set its resolution and quality. Click the Submit button. Then you
can exchange the pairs of resolution and quality directly in the Home page.