Approach Tech Appro IP Camera LC-7314 - Manual (Page 66)

64
5.2.2 Install the CMS in your PC
Install the CMS from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation
automatically. Follow the on-screen instructions to proceed with the rest of the installation
procedure as they appear.
NOTE: The program will update the .NET Framework to version 2.0 automatically. Please
click “Next” to start and finish the setup process.
3. Select a language of the installing process from the drop-down list in the “Installer
Language” window.
4. After the installation is complete, pop up the START menu from your computer, and point
to Programs / APPRO CMS / APPRO CMS to open up the program selection page as
shown below. Click the APPRO CMS tag to start the CMS program.
Install the CMS for the ZIP file.
1. Save the ZIP file to your PC and extract the file to a designated directory.
2. Open the extracted folder. The folder contains 1 file.
3. Click the setup icon to execute the installation and then follow the on-screen instructions
to proceed with the rest of the installation procedure.
4. After the installation is complete, click the START menu from your computer, and point to
Programs / APPRO CMS to start the CMS program.
NOTE: Please make sure the TCP/IP communication software has been properly set and
configured in your computer. To check your TCP/IP settings, please refer to
section 4.5 (the TCP/IP configuration setting).