LEADER LV5800 User Manual
Page 2
LEADER INSTRUMENTS CORPORATION
11095 Knott Avenue, Suite B - Cypress, CA 90630
www.LeaderAmerica.com
Revision 01/13
(a) ETHERNET:
Ethernet remote control to execute panel operations. It supports TELNET or FTP.
(b)
REMOTE:
Remote connector provides remote control of preset selections.
(c)
DVI-I OUTPUT:
Allows output to an external monitor via DVI-I.
(d) DIGITAL AES/EBU AUDIO OPTION (OP40A):
Provides 8 channels of digital audio. Supports loudness, lip-sync,
Lissajous, bar graph displays and A/V delay measurement.
(e) EYE PATTERN OPTION (OP02):
Optional board that provides Eye Pattern and Jitter measurement functionalities.
(f)
SDI INPUTS:
2 Serial Input boards (max. 8 inputs) support Dual Link and SD/HD SDI operation (auto-detect).
(g) UNIVERSAL POWER SUPPLY:
90-250 VAC (50/60 Hz).
(h) EXT REF INPUT:
EXT REF Loop-through Input accepts Standard Tri-level Sync and Black Burst.
a
b c
d
e
f
g h
LV5800 Rear Panel with SDI input options, Eye Pattern option, and Digital Audio options
AVAILABLE OPTIONS:
HD/SD SDI INPUT (OP01A): Allows four HD/SD SDI inputs per board. Up to 8 inputs (2 boards).
EYE PATTERN / JITTER MEASUREMENT (OP02): Provides eye pattern and jitter measurement functionalities to
HD/SD SDI feeds only.
COMPOSITE INPUT (OP03A): Allows up to 2 tri-sync composite inputs and one PIX out.
MPEG DECODER INPUT (OP04): This optional board accepts MPEG-2 signals and provides both monitoring and
decoding capabilities to display the signal as waveform, vector, picture and audio.
3G SDI INPUT (OP06): Upgrades the LV5800 to accept up to two 3G input signals.
3G, HD/SD SDI EYE PATTERN (OP07): Provides eye pattern and jitter measurement functionalities to 3G, HD/SD
SDI feeds.
DVI-I OUTPUT (OP20): Allows the instrument to output its signals through a DVI-I connector to an external monitor.
DIGITAL AUDIO (OP40A): This board operates as an AES/EBU input/output unit and supports loudness, lip-sync,
and A/V delay measurements in addition to providing Lissajous and bar graph displays for up to 16 digital channels
and 2 analog audio channels.
DOLBY
®
E (OP40D): Supports Dolby
®
capabilities.
CINELITE II: Adds CINELITE
®
and CINEZONE functionalities to the instrument to analyze the different luminance
levels.