Lectrosonics R400 - Manual (Page 14)

R400
ADDING USER GROUP FREQUENCIES
1. From the Main Window, press the MENU
control to enter SetUpTx, then press the
MENU control again to enter the TopMenu and
rotate the control to select the Tuning setup
screen.
2. Press the MENU control to enter the Tuning
setup screen, then rotate the control to select
either User Group U or User Group V.
3. Press PREV MENU to return to the SetUpRx
menu.
4. Rotate the MENU control to select the Freq
menu. Press the control to enter the menu,
then double press the control to enter Edit
Mode.
Note
While in Edit Mode, all the frequencies available for use by the
receiver will be listed as the MENU control is rotated. Those
frequencies already selected for Factory, or User Groups will be
identified with a triangle to the left side of the frequency.
5. Rotate the MENU control to tune to the
desired frequency, then simultaneously press
the PREV MENU button and the MENU
control to store that frequency in the
preselected user group. A triangle mark
appears to the left of the frequency to indicate
that it has been stored.
6. Repeat step 5 for each frequency to be stored
in the selected user group.
7. When finished storing user selected
frequencies, press PREV MENU to return to
the Main Menu.
ERASING USER GROUP FREQUENCIES
1. From the Main Window, press the MENU
control to enter the TopMenu, then press
MENU again to enter SetUpRx and rotate the
control to select the Tuning setup screen.
2. Press the MENU control to enter the Tuning
setup screen, then rotate the control to select
either User Group U or User Group V.
3. Press PREV MENU to return to the SetUPRx
menu.
4. Rotate the MENU control to select the Freq
setup screen. Press the control to enter the
menu, then double press the control to enter
edit mode.
5. Rotate the MENU control to select the
frequency to be erased. (A triangle appears to
the left of stored frequencies.) Simultaneously
press the PREV MENU button and MENU
control to deselect the frequency.
14