Lectrosonics DMTH4 - Manual (Page 18)

DMTH4
LECTROSONICS, INC. 18
Inputs to
Expansion
Outputs Tab
Connect Input
Channels 1 and 2
to Expansion Out
Channel 1
Out Source Tab
TEL Output Source
Setting up the DMTH4
Output Source Multiplexer
The TEL output needs to be configured so that Expan-
sion Final Mix 1 is sent over the telephone line for use
at the remote Conference Room.
1.) Select the Out Source Tab in the DMTH4 Control
Panel.
2.) Click the down arrow on the TEL Output Source se-
lection list and select Exp Final Mix 1 from the list.