Lectrosonics LE Series - Manual (Page 10)

TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE
Active Logic LEDs cycle through 1-8 No Active Logic Input detected
Equalizer/Notch Filter buttons and
Adjust control do not respond Operate/New Setting switch in
Operate position. Switch to New Setting
Equalizer/Notch Filter buttons and
Adjust control respond, but sound
doesn’t change. Active/Bypass switch in Bypass
position. Switch to Active.
"Clicking" sound heard
when filters switch. Output of MAP system too low (too much gain at
power amp). Increase level of AC1 output and
decrease power amp gain.
9