Fluid data – Liquid Controls SP4000 User Manual
Page 57
54
SP4000 Flow Computer
FLUID DATA
2
RATE
1
TOTAL
2
RATE
1
TOTAL
2
RATE
1
TOTAL
6.7
FLUID DATA
(Continued)
MOLE % NITROGEN
MOLE % CO
2
VISCOSITY COEF. A
Enter the Mole % Nitrogen in the anticipated natural gas mixture.
This information is needed by the NX-19 computation
Note:
Select "NATURAL GAS (NX-19)" in "FLUID TYPE" to activate
this function.
Input:
Number with fixed decimal point: 0.00...15.00
Display:
0.00
MOLE % NITROGEN
Enter the Mole % CO
2
in the anticipated natural gas mixture. This
information is needed by the NX-19 computation
Note:
Select "NATURAL GAS (NX-19)" in "FLUID TYPE" to
activate this function.
Input:
Number with fixed decimal point: 0.00...15.00
Display:
0.00
MOLE % CO2
Enter the Viscosity coefficient A for the anticipated fluid. This
information is needed by the viscosity computation for UVC and for
Reynolds Number calculations.
Note:
Select "SQUARE LAW 16PT" or "LINEAR UVC" in
"FLOWMETER TYPE" to activate this function.
Input:
Number with fixed decimal point: 0.000000...1000000
Display:
0.000444
VISCOSITY COEF. A