ASA Electronics AVT-1940 - Manual (Page 14)

Changing the TV’s Channel Memory
Your TV’s channel determines the channels that are available using the ù CH ü buttons. You can
add channels to this memory or remove them from memory. If a channel is removed from memory
you can tune to it with the
ù CH ü buttons.
If there is just one channel memorized, then the Add/Delete Channels function will search the whole
channels. But if there are two or more channels memorized, then the Add/Delete Channels function
will search the memorized channels only.
Adding/Deleting a channel to memory
1. Use the number buttons to tune to the channel.
2. Press the MENU button twice, then “Set Up” menu will display.
3. Use the
ù CH ü buttons to select “Add/Delete Channels”, then use the ÿ VOL ÷ button to enter
the Add/Delete Channels” process.
4. If the channel is not in memory, then use the ÿ VOL ÷ button to delete the channel from memory.
5. If the channel is in memory, then use the ÿ VOL ÷ button to delete the channel from memory.
6. If you are going to delete another channel, press the щCH ь buttons until desired channel is
selected. Press the ÿ VOL ÷ button to delete the channel.
7. Wait 10 seconds or press the MENU button four times to ex
Displaying the Current Channel
12- Chapter 3: Operating Your TV
1. To quickly see the current channel number and
status, press DISPLAY button on the remote
control
The current channel number and status will be
displayed.