ASA Electronics AVT-1940 - Manual (Page 17)

Using Timer Functions
Your TV has a built-in clock, and you can set the TV to turn on and off at times that you select. You
can also set your TV to turn off after counting down a certain amount of time.
Setting the Clock
1. With the TV turned on, press the MENU button until “Time” menu is displayed.
2. The “Set Clock” item will be selected. Press the
ÿ VOL ÷ buttons to set the clock. If you hold
down either ÿ VOL or VOL ÷ button, the corresponding numbers will change more quickly.
3. When the clock is set correctly, use the ù CH ü buttons to select another “Time” function, or press
the MENU button until menu OSD will disappear.
Setting the Wake-Up timer
If you enter a time in the “Wake-Up time” setting, your TV will automatically turn on at that time.
Follow these instructions to set the “Wake-Up time”.
After the Wake-Up Timer has turned on the TV set, if the user does not input the user control (e.g.
remote CH or VOL key) within 15 minutes, the TV set will turn off automatically. If the user inputs the
user control within15 minutes, the TV set will turn on continuously.
It is a safety feature for prevention of any kind of problem without human control.
1. With the TV turned on, press the MENU button until “Time” menu is displayed.
2. Use the
ù CH ü buttons to select “Wake-Up Time” item.
3. If you hold down either ÿ VOL or VOL ÷ button, the corresponding numbers will change more
quickly.
4. When the setting is correct, use the ù CH ü buttons to select another “Time” function, or press the
MENU button until menu OSD is displayed.
Chapter 4: Using Timer Functions-15
4