Luminex 100 IS Version 2.2 - Manual (Page 142)

Luminex 100 IS User Manual Version 2.2 x MAP Technology
6 - 88 PN 89-00002-00-069 Rev. A
‹ To automatically begin analysis upon completing sample
acquisition:
1. Click Tools from the menu bar and select Options. The Options
dialog box appears. See Figure 79.
Figure 79. Options Dialog Box—Select Auto-start Analysis
2. At the General tab, click the Auto-Start Analysis checkbox.
Click OK to complete the operation.
When the system completes the batch acquisition, it will
automatically begin analyzing data.
Analyze
Processed Batch
Data
You can analyze only processed batches. If you acquire or process
batches as a multi-batch, the system lists them separately and they
must be analyzed separately, and manually by user.
All batches within a multi-batch have the multi-batch name listed
under the multi-batch ID name column. This allows you to see the
batches that have been processed as a multi-batch.
‹ To analyze data from processed batches and multi-batches:
1. Click Analysis from the Home tab. An Open Batch dialog box
appears showing only processed batches.