Luminex 100 IS Version 2.2 - Manual (Page 92)

Luminex 100 IS User Manual Version 2.2 x MAP Technology
6 - 38 PN 89-00002-00-069 Rev. A
4. Click OK to complete the operation.
Export System
Calibration or
Control Lots
‹ To export system CAL or CON lots:
1. Click New CAL Targets or New CON Targets on the
Maintenance tab. An Update CAL Targets or an Update CON
Targets dialog box appears as appropriate. Ensure you have the
desired lot to export displayed or selected.
2. Click Export CAL or Export CON as appropriate. A Save As
dialog box appears.
3. Select the folder where you want to export the lot as the Save-in
location. The default is the Backup folder found in:
C:\Program Files\Luminex\Luminex 100 IS\Backup .
4. Enter the lot name for the exported lot into the File Name field.
5. Click Save.
6. Click OK. The Update CAL Targets or the Update CON Targets
dialog box closes. After you click OK, you can use the lot target
values with the next calibration or verification.
The system saves the lot to the existing software as a lot accessible
for the next calibration and/or verification. Once you export the
desired calibration or control lot you can save it to disk to import to
another computer.
Luminex XYP Instrument
Commands
The Luminex XYP instrument commands are those commands
primarily involving the Luminex XYP instrument portion of the
system.
The Luminex XYP instrument commands let you eject or retract the
plate holder on the Luminex XYP instrument and command the
Sample Probe up or down.
Eject and Retract
Luminex XYP
Instrument Plate
Holder
‹ To eject and retract the Luminex XYP instrument plate holder:
1. Click Eject/Retract on the Maintenance tab. The Luminex XYP
instrument plate holder ejects.
2. Click Eject/Retract. The Luminex XYP instrument plate holder
retracts.