Mallory Ignition ACCEL DIS 8 75610 - Manual (Page 9)

DIS 8
9
Coil Output Harness
Unless you intend to operate the module in Sequence Firing Order, you should wire the
coil outputs so as to match up with the physical cylinder number on the engine. The
module will fire each output in the firing order programmed via the handheld controller.
In Sequence firing order, the module will fire the coil outputs in order (1, 2, 3, 4, 5, 6,
7, 8). You must wire the individual coil outputs to the proper physical cylinder number
on the engine as needed to create the desired firing order.
Do Not touch output/primary coil wires with key ON or while the
engine is running. (Primary and Secondary outputs contain High
Voltage that can be lethal or can cause severe injuries)
PIN CHANNEL WIRE COLOR
A Coil 1 Output Purple
B Coil 2 Output Red/White
C Coil 3 Output Blue
D Coil 4 Output Green/White
E Coil Positive Pink/Black
F Coil Positive Pink/Black
G Coil 5 Output Green
H Coil 6 Output Blue/White
J Coil 7 Output Red
K Coil 8 Output Purple/White