Master Appliance Deluxe Varitemp Heat Gun - Manual (Page 2)

Temperature Velocity
Max. Max.
Models °F °C Volts Amperes Watts F/M CFM
VT-750C 1000 540 120 14.5 1740 2200 21
VT-752C 750 400 220/240 7 1680 2800 21
The Varitemp ® Heat Gun is a
heavy-duty, Industrial-quality,
general-purpose heat gun.
High temperature Industrial
jobs are done faster with this
heat gun, because our
MASTER models have higher
power and air flow ratings.
Your Varitemp ® Heat Gun is
equipped with an electronic
stepless temperature control
dial which regulates the
current going through the
heating element. This allows
outlet temperatures to be set
from ambient to a maximum of
1000°F. The Varitemp control
knob may be locked into place
so that the same setting may
be used time after time, if so
desired. This prevents
changes in settings between
production runs. It also
prevents accidental setting
changes.
Heat Guns are a source of
extremely high temperature
flameless heat (up to
1000°F/540°C). As with other
products which generate
extremely high
temperatures, regardless of
your specific application,
extreme care and caution
should be observed when
using this product.
Therefore, we recommend
that you pay particular
attention to the safety
instructions which we have
provided for your protection.
WARNING: THIS PRODUCT
IS A SOURCE OF VERY
HIGH TEMPERATURE
FLAMELESS HEAT. AS WITH
ANY ELECTRICAL TOOL,
WHEN USING HEAT TOOLS,
ALWAYS FOLLOW SAFETY
PRECAUTIONS TO REDUCE
THE RISK OF FIRE,
ELECTRIC SHOCK OR
PERSONAL INJURY. 1) Read and understand this
instruction manual before
using this product. Save this
manual for future
reference.
2) WARNING: With a heat
gun, as with all other heat
tools, keep a fire
extinguisher handy and
observe all sensible fire
precautions.
We do not recommend
using this heat gun on
hidden areas such as
behind walls, ceilings,
floors, soffit boards and
other panels that may
contain flammable materials
(dust, wood chips,
insulation, rodent nests,
etc.) that could be ignited by
the heat gun when working
in these locations. When
working in these locations,
keep the heat gun moving in
a back and forth motion.
2
Description & Introduction
Important Safety Instructions
Specifications
Size . . . . . . . . . . . . . . . . . . . . . 8"L x 9-1/2"H x 6”W
Nozzle diameter . . . . . . . . . . . . . . . . . . . . . . 1-1/2"
Shield diameter. . . . . . . . . . . . . . . . . . . . . . . 1-3/4”
Cord length . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Ft.