MAX HN65J - Manual (Page 8)

NAIL LOADING
Open the Magazine:
Pull up Door Latch and swing Door open. Swing Magazine
Cover open.
Door Latch
65 mm (2-1/2”) 40 mm (1-1/2”)
When using 40 mm (1-1/2”) nails, attach the nail support in
such a manner that a mark “40” can been seen. When using
65 mm (2-1/2”) ones, attach the nail support upside down.
Nail Support
To detach, push the latch on the back of the magazine with
a finger.
Nail loading:
Nail
Slot
Feed Pawl
Place a coil of nails over the Nail Post in the Magazine.
Uncoil enough nails to reach the Feed Pawl, and place the
second nail between the teeth on the Feed Pawl. The nail
heads fit in slot on Nose.
Swing Magazine Cover closed.
Close the Door.
Check that Door Latch engages. (If it does not engage,
check that the nail heads are in the slot on the Nose).
10