MAX GS865E - Manual (Page 23)

23
7. MAINTAIN FOR PERFORMANCE
1. HANDLE THE TOOL WITH CARE
Never drop, collide or hit the tool against a hard material. It may be deformed, cracked or broken.
2. DO NOT TRIGGER THE TOOL WITH NO PINS LOADED
If you repeatedly operate the tool with no pins loaded, the durability of each section will be reduced.
3. INSPECT THE TOOL PERIODICALLY
In order to maintain the performance of the tool, clean and inspect the tool periodically. To have it
inspected, contact MAX authorised dealers.
4. CLEAN THE AIR FILTER
Clean the Air Filter every other day. Open the Air Filter Cover with a regular screwdriver, remove
the Air Filter from the inside and clean it with an air gun, and so on.
5. CLEANING INSIDE OF THE TOOL
After driving approx. 50,000 pins, parts inside of the tool including the spark plug require the
cleaning to maintain a better ignition performance. Bring the tool to the MAX authorised distributors
for cleaning inside of the tool.
8. STORING
q When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid
rust.
w Do not store the tool in a cold weather environment. Keep the tool in a warm area.
e When not in use, the tool should be stored in a warm and dry place. Keep out of reach of children.
r All quality tools will eventually require servicing or replacement of parts because of wear from the
normal use.
w Set the newly charged Battery into the main body until it has clicked.
(See Page 15 for the charging method)
e Set the Fuel Cell.
(See Page 18 for the setting method)