MAX LM-380A - Manual (Page 12)

BEFORE USE
12
2-5 INPUT SCREEN
Screen layout
10 SPACE Press this key to input a space.
11 A / a Press this key to switch capital letters to small letters.
12 SHIFT
Press this key to access secondary characters on the key or the secondary
functions of group
¤¦¥¨§
, (4), (9) and (13).
PRINT Press this key to move to the “PRINT” function.
13 FEED
(SHIFT PRINT)
Press these keys to feed tubes or tapes.
14 Character keys Press these keys to input characters.
15 Press this key to change lines.
1 SHIFT Displays S when “SHIFT” is “ON.”
2 PRT/PITCH
In case of [PITCH PRINT MODE], display the “PITCH LENGTH.”
(See 6-4: PITCH PRINT)
In case of [NORMAL PRINT MODE]: Displays the “PRINT LENGTH.”
(See 6-5: NORMAL PRINT)
3 PITCH CUT Displays the way of the “PITCH CUTTING.” (See 6-4-2: PITCH CUT)
4 BLOCK No. Displays the “BLOCK NO. “ on the cursor.
5 INPUT screen Displays the characters entered and the edit marks.
6 STATUS screen
The upper field displays the status of the sequential number if it has been
set. The lower field displays the object of the printing selected.
7 REPEAT
Displays the repeating numbers of the block on the cursor.
(See 6-7: REPEAT)
8 C/SPACE Displays character space. (See 6-3: CHARACTER LINE/SPACE)
9 C/WIDTH Displays the character. (See 6-2: WIDTH)
10 C/SIZE Displays the character size of the block on the cursor. (See 6-1: SIZE)
11 FRAME Displays when the framing is “ON.” (See 6-9: FRAME)
12 VRT Displays when the vertical printing is selected. (See 6-6: VERTICAL)
13 A ,a
“A “is turned on. : Enables inputting capital letters
“a” is turned on. :Enables inputting small letters.
© © © ©            
    !" !" !" !" $# # # #&% % % % ')(102 ')(102 ')(102 ')(102 43 43 43 43
ዝዞዟ፧
5 5 5 5 3$ 3$ 3$ 3$76 6 6 68943 943 943 943A@ @ @ @)99B 99B 99B 99B
C2 C2 C2 C2 $# # # #8B B B BEDD DD DD DD
P B N
A
a
VRT
FRAME
SHIFT PRT/PITCH PITCH CUT BLOCK NO.
REPEAT C/WIDTH C/SIZE
1 2 3 4
5
6
7 8 9 10
11
12
13