MAX LM-380A - Manual (Page 13)

BEFORE USE
13
The meanings of edit marks displayed on the screen are as follows.
(1) : Represents the [PITCH PRINT MODE] activated. Represents a group of blocks
with same pitch length until next [P] mark. (See 6-4: PITCH PRINT)
(2) : Represents the block. Up to 100 blocks can be input in an entire document.
(See 6-4: PITCH PRINT)
(3) : Represents the line feed.
(Printing on tubes) 2.5 to 4.2 : Only 1 line can be set.
5.2 and 5.5 : Up to 2 lines can be set, provided 2mm
character size are used.
(Printing on tapes) Up to 3 lines can be set, provided 12mm tape and 2mm
character size are used.
(4) : Represents the SEQUENCE is set. (See 6-8: SEQUENCE)
2-6 SELECTING THE SCREEN LANGUAGE
You can select the screen language according to the model type of your machine.
Model type Language
LM-380A A11 , A11-T English or Chinese(T) (Traditional Chinese Character)
LM-380A A11-C English or Chinese(C) (Simplified Chinese Character)
LM-380A BSA English or Chinese(C) (Simplified Chinese Character)
LM-380A BSB English or Chinese(T) (Traditional Chinese Character)
LM-380A CE English or Chinese(C) (Simplified Chinese Character)
[HOW TO SELECT]
1. Turn the power on, while pressing L and G at the same time.
The [LANGUAGE MODE screen] appears after displaying the LETATWIN logotype.
2. Select the language by using / key. And then press ENTER , the power supply
automatically turns off.
3. Turn the power on again, then it starts up with the language selected.
[LANGUAGE MODE screen]
Note: When you change the screen language, all of the internal memory is cleared.
When selecting English, you can neither input nor print Chinese characters.
FHG 21I FHG 21I FHG 21I FHG 21I
PRQ8SUT9V9WVYX`7a PRQ8SUT9V9WVYX`7a PRQ8SUT9V9WVYX`7a PRQ8SUT9V9WVYX`7a
Pb08(U092 Pb08(U092 Pb08(U092 Pb08(U092
29Tc8dSeW"Q 29Tc8dSeW"Q 29Tc8dSeW"Q 29Tc8dSeW"Q