Max Machinery 276-5XX SERIES 4-20MA TRANSMITTERS - Manual (Page 4)

Mounting: The 276 Transmitter screws on and off of the Flowmeter. Because of the random
location of the starting point of the threads, one Transmitter will probably not line up with the
“in” and “out” ports of the Flowmeter like another will. The electrical outlet of the Transmitter
can be rotated clockwise or counter clockwise one turn by loosening the clamping screw at
the base of the Transmitter housing [shown below].
Two flats are provided for screwing the Transmitter on to the Flowmeter. Care should be
taken when slipping the Transmitter on and off. The stator wire can be easily damaged.
( 4 ) 276-515-350 © 2006 Max Machinery, Inc.
INSTALLATION
—Mounting & Dimensions
Discontinued