Micromod MOD: Modcell 2050R MODBUS Communications - Manual (Page 22)

IB-23C650M
RS-485 COMMUNICATIONS SETUP
Table 1. RS-485 Setup Menu
Step Step Description
Top
Display
8.8 Computer Set-point Mnemonic (Local 4)
UP or DN set values and SCRL accesses
characters as described in Step 8.5. Press SCRL
after the third character to continue with Step 8.9.
CMP LO4
8.9 Computer Set-point Mnemonic (Remote)
UP or DN set values and SCRL accesses
characters as described in Step 8.5. Press SCRL
after the third character to continue with Step 8.10.
CMP REM
8.10 Computer Set-point Mode Value.
UP or DN sets value
SCRL to advance to Step 8.11
COMPUTER
8.11 Use Computer Active Tag
UP or DN selects yes or no.
SCRL to advance to Step 8.11.1 from yes or
Step 8.12 (Computer Failure Setup) from no.
USE CMP
8.11.1 Computer Active Tag
UP or DN sets value (press UP to begin then
press UP to start at letter A or press DN to start at
9.
Press
SCRL to access the next character.
Repeat through the last character. Press SCRL
after the last character to advance to Step 8.12
COMPUTER
8.12 Computer Failure Setup.
UP begins setup at step 8.12.1.
SCRL to advance to Step 9 (bus enable).
CMP FAIL
18