Avaya 3641 - Manual (Page 22)

22
Advanced Features
Phonebook Edit Entry Options
Speed-Dial
The Avaya 3641/3645 Wireless IP Telephone can assign up to 10 speed-
dial keys to numbers entered into the phonebook.
Open the speed-dial list by pressing the
Spdl softkey from standby mode.
If programmed, the first item on this list is the system-wide speed-dial
number set by the system administrator. It is specially marked with a
greater-than symbol (>) on the left side of the row. It is usually reserved
for emergency situations.
To make a speed-dial call, press and hold the corresponding key for one
second. The system speed-dial key must be pressed for three seconds. The
handset will display the name and number for one second before the call
is dialed. You may press END during this second to terminate the call.
You may also use the Nav keys to highlight a number or listing and then
press START or the Spkr softkey to dial the number. The Exit softkey
returns you to the standby mode.
A phonebook entry may be assigned to a speed-dial key from the speed-
dial list. Select the speed-dial key that you wish to assign and then press
If you want to Then
Dial number Press START or the Spkr softkey.
Assign a speed-dial
number to this entry
Press the Spdl softkey. Use the Nav keys to
highlight an empty slot and then press
NavOK.
Edit an entry Press the Edit softkey to open the enter
number display and edit the existing number.
Return to
phonebook list
Press the Back softkey or NavOK .
21-601633_1.book Seite 22 Freitag, 13. Juli 2007 4:42 16