Acer Network Device Altos R520 - Manual (Page 64)

3 System upgrade 54
2 Press the blue release lever to unlock the optical drive tray (A) and
slide the optical drive tray out through the front of the server (B).
3 If no device will be installed in the drive bay, install the filler panel
in the drive bay.
If installing a new optical drive, see succeeding section.
To install a slim-line optical drive:
1 Observe the ESD precautions and pre-installation instructions
described on page 39.
2 If necessary, remove the old optical drive. See previous section.
3 If a filler panel is installed, remove it from the drive bay.
4 Remove the new drive from its protective packaging.
TP02261
A
B