Mirion Technologies IST R90 Series Rees Cables & Connectors - Manual

Rees Minikevlar 102.00.042
Cores
2 coaxials 75 ohm
1 screened quad (7 x 0.2mm) <.008”>
2 groups of 7 (each 7 x 0.2mm)
1 group of 5 (each 7 x 0.2mm)
3 singles (each 7 x 0.2mm)
3 earth returns (each 16 x 0.2mm)
RE
ES
Ca
bl
es
&
C
on
ne
cto
rs
IST R90 Series Cables and Connectors are
designed for use with all of the R90 Series nuclear cameras
and have been specifically developed for nuclear applications
underwater or in air.
All the IST R90 Series cameras have a very high radiation tol-
erance which is partly achieved by their dual unit construction
with the majority of the camera electronics being contained in
a separate camera control unit (CCU) outside the active area.
This design approach reduces radiation damage, while also
ensuring easy service access. The CCU’s are linked to their
associated cameras by single composite camera cables - with
matching connectors - which provide all the necessary power,
control and signal functions.
Imaging & Sensing Technology Corporation
Features
• Air and underwater
appplications
• Radiation tolerant
• Wide range
• Specifically developed
for nuclear operations
• Site reterminable
connectors
• Field proven design
Mechanical
Diameter ...............................................11.30mm <.44”> (±0.38mm)
(<.015”>
Installation bend radius ........................82mm min (3.2”)
Continuous flexing bend radius.............165mm min (6.5”)
Weight in air .........................................170g/m (.44 lb/yd)
Break strength .......................................324kg (714 lb)
Operating temp.range ...........................-20° to 70°C (-4°F to 158°F)
Total radiation dose .............................106 Gy (108 rads)
Electrical
75 ohm coaxial:
Characteristic impedance .....................75 ± 2 ohms
Attenuation ...........................................5.7 dB per 100m (328’) at 10 MHz
XLPE Insulated Cores:
dc resistance .........................................8.8 ohms per 100m (328’) nominal
Earth returns:
dc resistance .........................................4.0 ohms per 100m (328’) nominal
31 core camera cable with
kevlar strength member,
XLPE cores, and polyure-
thane elastomer jacket.