Mirion Technologies IST R90 Series Rees Cables & Connectors - Manual (Page 4)

w w w . i s t i m a g i n g . c o m
Imaging and Sensing Technology Corporation
1105
IST reserves the right to amend or change the information on this sheet without prior warning.
204 IST Center
Horseheads, NY 14845 USA
Tel: 607-562-4300
800-432-1478
Fax: 607-562-4392
E-mail: [email protected]
19501 144th Avenue NE
Suite F1100
Woodinville, WA 98072 USA
Tel: 425-881-0778
Fax: 425-869-0667
E-mail: [email protected]
12954 Stone Creek Dr.
Suite C
Pickerington, OH 43147 USA
Tel: 614-367-2050
Fax: 614-367-2464
E-mail: [email protected]
Station Road
Alton, Hampshire
GU34 2PZ, UK
Tel: 01420 541600
Fax: 01420 541700
E-mail: [email protected]
Kaiser-Konrad-Str 93a
D 53225 Bonn Deutschland
Tel: 0228 625088
Fax: 0228 626300
E-mail: [email protected]
Rees 90 Series Connectors
Standard Site Reterminable Underwater Connectors
Depth rating ..............................................100 m (328’)
Minimum installation distance
from camera connector to cable
path perpendicular to cameras axis
with TV36: .................................................270mm (10.6”)
With Minikevlar: .......................................205mm (8.1”)
With Minicable: ........................................170mm (6.6”)
Voltage Rating: .........................................600 V dc
Current Rating: ..........................................5 A
Break Strength w/Minikevlar or TV36........Better than 75 kg (165lb)
IST underwater connectors are
constructed in stainless steel. All in-
terconnections are protected by seals.
Terminations are made using high
quality contacts. All of the R90 series
underwater connectors share the
same, basic mechanical design with
size and inserts dependent upon the
camera cable and/or camera selected.
Camera Cable Diameter Length
Connector Insert Contacts Center (mm) (mm)
R930CNR04A 24 pin Solder Minikevlar 30 117
R930CNR06A 24 pin Solder TV36 33 117
R930CNR08A 24 pin Solder Minicable 30 117
Special Underwater Molded Connectors
A range of moulded connectors are available to special order. Molded
connectors cannot be reterminated, but they can operate to a depths in
excess of 200 m (656’”). The minimum installation distance from the back
of the camera (with cable leaving at right angles) is 230mm (9”) with
TV36, 210mm (8.3”) with Minikevlar, and 180mm (7.8”) with Minicable.
Break strength with minikevlar or TV36 is 75 kg (165 lb).
Rees Underwater Moulded Connector
Rees 90° Stainless Steel Connector
Use of the 90° connector reduces the
total bend radius from the back of the
camera to the cable perpendicular to
75mm (3”) for all cable types.
Camera/CCU Mating Connectors
Camera CCU
Cable Type R93 Mk 2/Mk 3 Mk 3 Plug End
(20 way) (24 way) (48 way)
Minicable R930CNR08A R930CNR12A R930CNR09A R937CNR07A
Minikevlar R930CNR04A R930CNR10A R930CNR05A R937CNR07A
TV36
R930CNR06A R930CNR11A R930CNR07A R937CNR07A