MIDLAND BT Ski - Manual (Page 4)

4
Fitting and removing your Midland BTSKI
The
BTSKI can be easily fitted by sliding it
downwards so that it fits into the slot of the
fixing device.
BTSKI is maintained in position thanks to the
fixing clip located on the upper section (A).
To detach the BTSKI, simply press the fixing
clip and push the unit upwards.
Using the BTSKI without helmet
After have fixed your
BTSKI on its suitable tool
and have inserted the audio kit plug into the
central socket, wear your headset as shown in
the figure. Please, be sure to have placed the
microphone in the right way, with the white sign
oriented towards your mouth.
Using the BTSKI with a semi-rigid helmet
To place the
BTSKI into a semi-rigid helmet
you should first of all remove the little triangular
pads, used to cover the ears in most of helmets
on sale, and then put your helmet directly on the
BTSKI device.
If your helmet is not equipped with the two
removable pads, you could anyway mount your
BTSKI system by using the supplied Velcro-
band. Be sure to fix the Velcro-band as shown
in the figure.
A