MIDLAND BT Ski User Manual

Page 7

Advertising
background image

UK

7

hear one audio confirmation tone).

To make a voice call:

Briefly press “Control” button. If your mobile

phone supports voice calls, you will be asked

to speak the name of the contact you wish

to call.

Priority: Calls have a high priority, which means

that all other communications are temporarily

disabled when a call arrives and automatically

re-enabled once the call ends.
Attention: the voice call command is possi-

ble only if the BTSKI has never been con-

nected to another BTSKI for Intercom com-

munication.
Ending a call

There are several ways to end a call:

Wait for the called person to end the call.

Press the “Control” button for 3 seconds (you

will hear an audio confirmation tone).

Press “End” button on the mobile phone.

Using the MP3 player feature of the

mobile phone

Many mobile phones are now designed to be

used as stereo MP3 players. The

BTSKI device

fully supports the A2DP and AVRCP protocols

that enable you to listen to stereo music and

remotely control your mobile phone’s MP3

player. You can even use the buttons on the

BTSKI unit to control the following play options:

Play, Pause, Forward and Backward.

Available controls:

To play/pause music

, double click the “Con-

trol” button.

To skip forward to the next song

, keep

pressed the “Volume+” button.

To skip backwards to the previous song

,

keep pressed the “volume-“ button.

To enable your connected MP3 Player

(ADP/AVRCP), press and hold down the “Vo-

lume +” and “Volume-“ buttons for 3 seconds

(this feature is active by default).

To disable the MP3 player

, press and hold

down the ”Volume+” and “volume-“ buttons (2

beeps will confirm it).

Priority: the music listening mode has the lo-

west priority. Therefore, it will always be disa-

bled when another type of communication is

enabled.

Using the intercom feature

To use the Intercom feature, be sure both

BTSKI units are turned on and previously

paired together.
Pairing with another BTSKI device
Place both

BTSKI units in Setup mode (red

Volume+

Volume -

Control

Advertising