MIDLAND 74-200 - Manual (Page 12)

12
1. Press and release the “DISP. MODE” button until “AL
Time” is displayed in the upper left corner of the display.
2. Press and release the set button. The display will begin
flashing. Press and release the “Hour / Date” button to
change the Hour. Press and release the “Min /Month” button
to change the Minute. Press the “Set” button to store your
settings
3. To activate the alarm, set the switch on the right side of the
74-200 marked “ON OFF ALARM” to the ON position.
The “SNOOZE” button on the top of the 74-200 is for
advancing the alarm time by 9 minutes each time the alarm
sounds. To switch OFF the alarm, move “ON/ OFF/
ALARM” switch to the “OFF” position.
Adjusting the Weather Frequency
We have not adjusted the weather frequency for your local area.
Look up your city in the supplied Weather Service directory and
note the freque ncy. Find the channel number that corresponds to
your frequency. To test for weather signals, switch the 74-200 on
with the switch marked “Max / Volume / OFF”. Press and release
the WEATHER bar on the front of your 74-200. This will
temporarily switch the 74-200 from standby to listen for Weather
Transmissions.
To set the channel. Press and release the “DISP. MODE” button
until “WEATHER ALERT” shows on the display. Open the
access door on the top of the unit to show the programming
buttons. Press and release the PROGRAM button then the