MIDLAND 74-200 - Manual (Page 23)

23
If you are using an external
antenna, ensure that it is
connected properly.
Ensure that the radio is set to
the NOAA weather channel in
use in your area. Contact
NOAA to ensure they are
presently broadcasting.
One or more FIPS codes are
stored in memory but the radio
responds to alerts for areas
other than those for the codes
stored.
Ensure that the all signals code
(999999) is not stored in a
memory.
The radio is not responding
properly to NWS weather alert
broadcasts
Ensure that you have
programmed the correct FIPS
code(s) into the radio’s
memory. Be sure that “999999
is not programmed with any
other “FIPS codes
If you desire to hear the alert or
operate a device from
EXT.ALERT jack ensure that
display shows WEATHER
ALERT ON. If not, press
ALERT.