MotorVac Cool Smoke EVAP Leak Detection System - Manual (Page 2)

[email protected] www.motorvac.com
Introduction
Congratulations! You are in possession of the most useful, yet simple to operate Evaporative Emissions
(EVAP) System diagnostic tester available today. This patented Cool Smoke technology creates diagnostic
vapour without the need for high temperature glow plugs or resistance coils. When testing an EVAP system
an inert gas such as nitrogen should be used to reduce the risk associated with introducing air into
a gas tank.
The MotorVac Cool Smoke was specifically developed to OEM specifications for diagnosing vehicle EVAP
system leaks. Additionally, the MotorVac Cool Smoke will also find intake manifold system leaks, exhaust
system leaks and under-dash vacuum system leaks. It will also diagnose many other closed systems where
you may suspect a leak, as well as pinpointing wind and water leaks entering the vehicle’s passenger and
trunk compartments. Its unique design allows the operator to confirm the integrity of the system being tested
by utilizing a metered-air system. If the tool has confirmed a leak in the system being tested, the tool then
introduces a special non-toxic diagnostic marked-vapor (smoke) into the system. To locate the source of
the leak you simply look for the smoke exiting the leak or use the optional UV Phazer NEO
™ light to view the
UV deposit left behind, pinpointing the exact location of the leak. (PN: 413025)
Please study this User Guide to become thoroughly familiar with the Cool Smoke.
Thank you for choosing MotorVac.
Sincerely,
The MotorVac Team.