MotorVac Cool Smoke EVAP Leak Detection System - Manual (Page 8)

[email protected] www.motorvac.com
060-0005 – SERVICE PORT ADAPTER (standard size) connects to factory
service port on most OBD-II vehicles.
Included Accessories
Optional Accessories
413016 – 50 WATT LAMP: This powerful white light makes it easy to find smoke
(16 ft./4.88 m power cable w/ battery clips)
413025 – UV PHAZER NEO: High output UV LED flouresces dyes brighter for faster
diagnosis and repair. Compact and cordless, the NEO uses a rechareable
Lithium Ion battery.
400-1054 – COOL SMOKE FLUID: Every new unit arrives with a 200ml (6.8 oz.)
bottle full charge of fluid. We recommend replacing the tester’s solution once a year
in order to keep the solution’s fluorescence fresh.
060-0007 – SMOKE DIFFUSER: Allows the operator to lay down a thick path of
smoke along doors, sunroof, windshield and window seams so any air
disturbance, caused by exiting internal cabin pressure, may be observed.
200-3110 – CAP PLUG KIT: Used to seal the intake ducting of the engine
being tested. They may be used to seal either the inside diameter of an opening,
or flip them over and seal the opening at the outside diameter.
200-8687 – EXHAUST CONES: Used to either introduce smoke into the exhaust
system; into any system that fits the cone’s tapered size; is used as an exhaust plug
when testing a dual exhaust system; or exhaust plug when testing the intake vacuum
system.
060-0008 – SCHRADER REMOVAL / INSTALLATION TOOL fits both sizes
of Schrader valves in vehicles with factory OBD-II service port fittings.
5