MPM Kasia 116 - Manual (Page 18)

18
GB
GRATING FUNCTION
Attach the disc holder C7 (fig. C) to the mixer bowl B1 (fig. B) on the drive shaft A1 (fig. A). Attach
one of the discs C1 to C6 to the disc holder depending which products you are going to be proces-
sing. Then put on the blender cover B2 (fig. B) and turn it anti-clockwise until the clasps snap in
place. The proper assembly sequence is shown in figure 6.
IMPORTANT! Use only the blender pusher B3 (fig. 9) to hold down and push the processed pro-
ducts.
Recommended speed: depending on the type of disc, speed setting 2 to 8 is recommended (see fig.
2). The PULSE function A7 may also be used (fig. 2).
JUICER FUNCTION
Attach the container H4 along with the filter H3 (fig. H) in the blender container B1 (fig. B) on the
drive shaft A1 (fig. A). Then put on the cover H2 (fig. H) and turn it anti-clockwise until the clasps
snap in place. Place the fruit you wish to squeeze juice from through the opening in the cover H2,
push in and hold the fruit in place only using the pusher H1. The proper assembly sequence is shown
in figure 10.
Recommended speed: for greatest squeezing efficiency use speed settings 7 – 8 (see fig. 2), as at
these settings of the speed controller in the container (H4) the centrifugal force is greatest and can
transfer the juice obtained into the blender container.
CITRUS SQUEEZING FUNCTION
Attach the squeezer container D2 (fig. D) onto the blender container B1 and turn it anti-clockwise
until the clasps snap in place. Then place the squeezer head D1 (fig. D) into the opening in the squ-
eezer container thereby attaching it to the drive shaft A1 (fig. A). Slice the citrus fruits you wish to
obtain juice from in half, then place each half separately with the pulp facing the squeezer head.
The proper order for assembling is shown in illustration 8.
Recommended speed: set the speed controller to speed setting 1 – 2 (see fig. 2).
IMPORTANT! The maximum capacity of the blender container is 1.5 litres of juice.
ACCESSORY STAND
The KATHY type 116 and 116/B food processor is equipped with an accessory stand (fig. J) as stan-
dard, making it easier to store the appliance's attachments. The stand has space for the following
attachments: disc C, citrus squeezer D, spatula E, kneading attachment and metal blade F, foam
whisk I.
CLEANING AND MAINTENANCE
Unplug the appliance before cleaning. Dismantle the attachments and accessories in the reverse
order from that in which they were attached for their functions. Clean all the attachments and ac-
cessories with water and a cleaning agent (ideally immediately after use, which greatly assists the
cleaning process) and then dry.
Do not submerge the power unit A in water or other liquids. It should only be wiped with a damp
cloth.
CAUTION: The accessories, i.e. blades, mixers, metal discs, bowls and their covers, should not be
washed in a dishwasher as they may become blunt or matted.
CAUTION: Take care when touching cutting blades, especially when removing them from the con-
tainer, emptying it and when washing. Warning: Risk of injury.