Multichannel Systems MEAS21+MEASwitchUSB Manual - Manual (Page 13)

9
4 Operating the MEA Switch
4.1 Controlling the MEAS2/1
The 120 channels from two 60 channel amplifiers are reduced to 60 channels. You can decide
from which of the two amplifiers a channel should be picked. The channel selection is mutually
exclusive, that means, channels with the same channel number, for example No. 21, cannot be
picked from both amplifiers. If you use a MC_Card with 128 channels or an USB-ME128-System,
you can use a MEAS4/2 for two pairs of 60 channel amplifiers.
The operation of the MEAS2/1 is computer-controlled via USB port. You can easily make your
selection with the MEA Switch USB software program.
Double-click the MEA Switch USB.exe file.
- OR -
Double-click the MEA Switch USB icon on your desk top.
The MEA Switch USB program starts.
The main window shows:
MEA Switch: Serial number of the device.
Info.... Information about the Version of the MEA Switch USB program.
MEA 1 / MEA 2 : MEA amplifier 1 to MEA amplifier 2 to which the MEAS2/1 is connected.
Electrode fields of the amplifiers in MEA standard 8 x 8 grid.
All: Button to select all electrodes from one amplifier, MEA 1 or MEA 2 respectively.