Multichannel Systems HE-Up User Manual
He-up, Heating element for mea1060-up amplifier, He-up he-up-con
Advertising
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Heating element for MEA1060-UP Amplifier
Installation
HE-UP
1.) You need the heating element (HE-Up), the connector board (HE-Up-Con)
to the temperature controller TCX, and four provided screws each.
2.) Mount the heating element onto the amplifier’s bottom.
Make sure the input pins go through the hole.
Input pins
HE-Up
HE-Up-Con
Advertising