He-up, Heating element for mea1060-up amplifier – Multichannel Systems HE-Up User Manual
Page 2
Advertising
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
Heating element for MEA1060-UP Amplifier
Installation
HE-UP
3.) Screw the heating element (HE-Up) tightly from the other side
with the provided four bigger screws (M3x6).
4) Mount the connector board (HE-Up-Con) so that
all six pins are connected to
the heating element. Tighten it with the provided four smaller screws (M2x4).
Input pins
Input pins
Scope of delivery:
1 HE-Up + 4 screws (M3x6)
1 HE-Up-Con + 4 screws (M2x4)
Advertising