Detroit Radiant Products Company PT Series - Manual (Page 7)

X
Y
6 7
PT Series 2.0 Installation • Heater Dimensions • Mounting LP Gas Model
Figure 2.1 • Heater Dimensions
Model No. Dim “X” Dim “Y”
P-16T 10 1/16 13 1/8
P-32T 10 1/16 18 5/8
Chart 2.1 • Heater Dimensions (in Inches)
Chart 2.2 • Operating Values
Model No. BTU/h Gas Type
Manifold
Pressure
Minimum Inlet
Pressure
(W.C.P.) *
Maximum Inlet
Pressure
(PSI)
P-16T 16,000 LP 11 Inches W.C. 12 Inches W.C. 350
P-32T 32,000 LP 11 Inches W.C. 12 Inches W.C. 350
* For purpose of adjustment
The heater contained in this carton has been factory assembled and is in an operable condition without
the need of adjustment or further assembly. Only use the pressure regulator (and hose, LP only) supplied
with the heater. Alteration of the heater or replacement of components not specified by Detroit Radiant
Products Co. voids all approvals and warranties.