Nitek FSS20811S - Manual

AC Inlet
Models FSS21611S & FSS20811S
16 & 8 Channel Video Optical Systems include either one FRS21611S
Receiver & one FTS21611S Transmitter or one FRS20811S Receiver &
one FTS20811S Transmitter
Installation and
Operation Manual
Introduction
The NITEK FSS21611S (16 Channel) and FSS20811S (8 Channel) fiber transmitter and receiver sets, are a fiber-optic
Universal-Mode™ system which can operate on either single-mode or multi-mode fiber. Digital transmission provides
broadcast quality video performance and bi-directional data, up to distances of 20Km (single-mode) and 1.2Km (multi-
mode). The RS422/RS485 port allows for the use of camera controls, the system begins communicating after power-up.
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-230005
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
09172013 680160113
Note: This installation should be made by a qualified
service person and conform with local codes.
Reduce risk of fire or electrical shock. Do not
expose this product to rain or moisture.
Safety
The FSS21611S & FSS20811S use a Class 1 laser system in accordance with IEC 60825-1.
It is always advisable to follow good practice when working with optical fiber systems. This includes:
• Do not stare with unprotected eyes at fiber ends or connector faces.
• Use only approved filtered or attenuating viewing devices.
• For other safety issues and advice on good practices associated with optical fiber systems see IEC 60825-1 or your
local safety officer .
The FSS21611S and FSS20811S can be either rack mounted, or resting on a desktop.
NOTES:
1. Use all four mounting screws to properly secure the unit to the rack.
2.
Mechanical loading - The mounting ears were designed for two ears to support one unit.
3. Cable space - Allow for proper bend radius of the fiber cable exiting the back of the unit. Do not exceed the recom-
mended minimum bend radius of fiber cable, as internal breakage can occur.
Device Mounting Options
Video BNC
Connectors
Data Port
for Camera
Control
Fiber Optic
Port (SC)