Nitek MNG6448 - Manual (Page 15)

15
Virtual Server
Virtual server can be enabled only under Router mode.
In the Access Point mode the Mesh unit acting as a virtual server for heterogeneous network. In the Router mode
the Mesh Unit is wirelessly coupled to FTP server, mail server and log server on LAN port; on WAN port, the Mesh
unit is coupled to PC. The Mesh unit is the virtual server, so that you have access to download files or get e-mail.
Figure 11 Virtual server
Enable Virtual Server: The Virtual Server must first be enabled. Check “Enable” and click Apply.
Name: Enter a name for the Virtual Server.
Private IP: This specifies the IP Address for the LAN.
Protocol Type: This field is optional. TCP or UDP.
Private Port : This specifies your LAN port.
Public Port : This specifies your WAN port.
Schedule: Allow setting a time when the Mesh unit acts as a virtual server, by enabling “from” option. “Always”,
sets the Mesh unit to act as a virtual server permanently. When configuration of the virtual server, is completed
please click “Add Rule” to save the setting.
Virtual Server List : This provides you with a detailed list of virtual servers.