Nitek MNG6448 - Manual (Page 19)

19
Data Encryption: Select the desired option, if enabled, the keys must be entered, and other wireless stations or
bridge must use the same keys. The default is None.
Options are:
None
WEP 64 bit: 10 Hexadecimal digits (any combination of 0-9, a-f, or A-F)
WEP 128 bit: 26 Hexadecimal digits (any combination of 0-9, a-f, or A-F)
WEP 152 bit: 32 Hexadecimal digits (any combination of 0-9, a-f, or A-F)
TKIP: Automatically enabled with either WPA with RADIUS or WPA-PSK authentication type is selected.
AES: Automatically enabled with either WPA2 with RADIUS or WPA2-PSK authentication type is selected.
TKIP+AES: Automatically enabled with either WPA & WPA2 with RADIUS or WPA-PSK & WPA2-PSK
authentication type is selected.
Security Encryption Keys (Hex)
Pass-phrase: To use the pass-phrase for generating the keys, enter a pass-phrase and click the “Generate Keys”
button. You can also enter the keys directly. These keys must match the other wireless stations or bridges. Only 8
to 63 characters can be entered.
Key1~~Key4: Select the key to be used as the default key. Data transmissions are always encrypted using the
default key. The other keys can only be used to decrypt received data. The four entries will be disabled if WPA with
RADIUS authentication option is selected.
Notice : The Access Point and the stations must have the same Authentication Type, Data Encryption and
Key, otherwise they can not connect.
You must first set Radius parameters to use 802.1X, WPA with Radius, WPA2 with Radius, WPA & WPA2 with
Radius.