Control Company 4115 RADIO-SIGNAL REMOTE THERMOMETER - Manual (Page 7)

7
C. °C/°F switch Selects between Celsius (°C) and Fahrenheit (°F).
D. CHANNEL switch Designates the remote unit Channel 1, Channel 2 or
Channel 3.
E. RESET button Returns all settings to default values.
F. Battery compartment Accommodates two AAA batteries.
G. Battery door
H. Wall-mount holder Supports the remote unit in wall-mounting.
I. Removable stand For standing the remote unit on a flat surface.
BEFORE BEGINNING
1. Assign different channels to different remote units.
2. Insert batteries for remote units before doing so for the main unit.
3. Place the main unit as close as possible to the remote unit, reset the
main unit after installing batteries. This will ensure easier synchroniza-
tion between the transmission and reception of signals.
4. Position the remote unit and main unit within effective transmission
range, which, in usual circumstances is 50 to 100 feet (15 to 30 meters).
Note: The effective range is significantly affected by building materials and
where the main and remote units are positioned. Try various setups for best
results.
Important: Though the remote units are weatherproof, they should be
placed away from direct sunlight, rain, or snow.
BATTERY AND CHANNEL INSTALLATION: REMOTE UNIT
The remote unit uses two AAA batteries. To install them:
1. Remove the screws on the battery compartment.
2. Select the channel number on the CHANNEL slide switch.