Audio Design Associates Cinema Reference Mach II PTM-8150 User Manual
Page 38
Page 37
4
The second line of the display will now show <AUXILIARY 8> where the <...> indicates that
you are in the select character position mode. Here the A will be underlined and blinking.
5
To change the A to a D, as in DSS RECORD, press the Mode knob. The second line of the
display will now change to >AUXILIARY 8<, where the >...< indicates that you are in the change
character mode. Again, the A will be underlined and blinking, indicating that you can now change the
A to a D.
6
Turn the Mode knob clockwise to change the A to a D and then press the Mode knob so that
the display now reads <DUXILIARY 8>.
7
Turn the Mode knob clockwise one click so that U is underlined and blinking and then press the
Mode knob. The display will again change from the select character position mode (<...>) to the
change character mode (>...<).
8
Turn the Mode knob counterclockwise so that the U changes to the letter S and then press the
Mode knob to return to the select character mode (<...>).
9
Turn the Mode knob clockwise one click so that the X is underlined and blinking and then press
the Mode knob to switch to change character mode (>...<).
10
Turn the Mode knob counterclockwise so that the X changes to an S and then press the mode
knob.
11
Turn the Mode knob clockwise one click so that the I is underlined and blinking and then press
the Mode knob.
12
To turn the letter I into a blank space (as in DSS RECORD), turn the Mode knob all the way
counterclockwise. The very last position is the blank space. Then press the Mode knob.
13
With the display now reading <DSS LIARY 8>, turn the Mode clockwise one click until the L is
underlined and flashing. Then press the Mode knob.
14
Turn the Mode knob clockwise until the letter L has been replaced by the letter R and press the
Mode knob.
15
With the display now reading <DSS RIARY 8>, turn the Mode knob clockwise one click until
the I is flashing and press the Mode knob.
16
Turn the Mode knob counterclockwise until the I is replaced with letter E and then press the
Mode Knob.
17
With the display now reading <DSS REARY 8>, turn the Mode knob clockwise one click until
the A is flashing and press the Mode knob.
18
Turn the Mode knob counterclockwise until the A is replaced with letter C and then press the
Mode Knob.
19
With the display now reading <DSS RECRY 8>, turn the Mode knob clockwise one click until
the R is flashing and press the Mode knob.