Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 94)

Page 93
4 The display’s second line will now read NON2 CHANNEL referring to non-Two Channel source
material (5.1). To alter the non-Two Channel Default Mode for this Input Label, press the
Mode knob. To alter the Two-Channel Default Mode for this Input Label, skip to step 6.
5 Turn the Mode knob to select the desired non-Two Channel Default Mode for this Input Label.
If you wish to have the Default Mode always engage the last mode used, you can select this
option by turning the Mode knob counterclockwise until the display’s second line reads
LAST USED. When done, press the Mode knob to continue with setting the Two-Channel
Default Mode for this Input Label. To completely exit the setup menu, turn any knob other
than the Mode knob.
6 Turn the Mode knob clockwise one click until the display’s second line reads 2 CHANNEL and
then press the Mode knob.
7 Turn the Mode knob to select the desired Two Channel Default Mode for this Input Label. If
you wish to have the Default Mode always engage the last mode used, you can select this
option by turning the Mode knob counterclockwise until the display’s second line reads
LAST USED. When done, press turn any knob other than the Mode knob to completely exit
the setup menu.
8 Repeat steps 1-7 for all Input Labels whose Default Modes you wish to alter.