Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 21)

Page 20
CD Player Connection
The Out of the Box input configuration for CD Player provides for analog audio connections. Connect
your line-level audio outputs from your CD player to the Cinema Reference Mach II’s Analog Audio
input #6.
If you are using a CD Player with either TOS-Link Optical or Coaxial digital audio outputs, you can
connect this component to the Cinema Reference Mach II for digital audio playback. When connect-
ing a CD Player to an analog input, the audio signal is first converted to analog internal to the CD
player and then the signal is converted back to digital internal to the Cinema Reference Mach II. As
such, it is best to bypass this down/up conversion by connecting the CD player directly to a digital
input on the Cinema Reference.
To maintain the most flexible Out of the Box setup, ADA suggests using a TOS-Link connection from
the CD Player to the Cinema Reference. In the event, that your CD Player does not feature, a TOS-
Link Output, you can opt to use one of the four Digital Coaxial inputs on the Cinema Reference,
providing these inputs are not already assigned to other source input labels. You will need to assess
the other connections you have already made, as well as those you will make in the upcoming pages,
to determine which Digital Coaxial input is open. If you have connected a DSS receiver to the Cinema
Reference using a TOS-Link interconnect, then Digital Coaxial Input #2 is available for use with the
CD Player.
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
7 8
L
R
L
R
L
R
L
R
AUDIO INPUTS
VIDEO INPUTS VIDEO OUT
1
2
3
4
DIGITAL AUDIO
INPUTS
AC INPUT
115V~60Hz/230V~50Hz
AC OUTPUT
10A~ Max Switched
ADA Bus¤
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+ DC 2
1- 2+
WARNING!
Risk Of Hazardous Energy! Make Proper Connections. AVERTISSEMENT!
Energie Electrique Dangereuse! Faire Des Connexions Propres
Pour L’Hautparleur. Voir La Notice De Fonctionnement.
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
Use Same
Value Fuse
115V~1AS.B.
230V~.5AS.B.
Voltage
Selector &
Safety Fuse
On This
Side
115 V
115V 230V
1 2 3
OPTICAL INPUTS
MAIN 2 3 4 1
S-VIDEO INPUTS
8 CHANNEL DB-25 INPUT
REC
SBL LS
RS
L
R
C
SUB SBR
MAIN
4 G ND O UT I N 12V DC
L
R
RECORD
OUT
COMPONENT VIDEO
Y P B P R
Y P B/B-Y P R/R-Y Y P B/B-Y P R/R-Y
O UTPUT
1
2
3
1 13
25 14
PIN
POINTS
C INEMA R EFERENCE M ACH II
H OME T HEATER C ONTROLLER
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION!
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR
MADE IN U.S.A.
ADA NET“
"Dolby", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,764, 5,974,380, 5,978,762 and other worldwide
patents issued and pending. "DTS", "DTS-ES Extended Surround", and "Neo 6" are trademarks of Digital Theater Systems, Inc. ' 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number
0323830. Other U.S. and foreign patents pending. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd. Surround
EX is a jointly developed technology of THX and Dolby Laboratories, Inc., and is a trademark of Dolby. Used under authorization.
2 3 4 1 PROCESSED VGA ONLY COMPOSITE & S-VIDEO
ARE UP-CONVERTED &
LINE-DOUBLED
115V~60Hz/230V~50Hz
VGASWITCHER
AC VOLTAGE
115V~2/10 A.S.B.
230V~1/10 A.S.B. VGA¥RGBHV¥HDTV INPUTS VGA¥RGB¥HDTV OUTPUT
+10dB
PIN +/- CHAN PIN +/- CHAN 1 / 14 LT 7 / 20 SBL 2 / 15 CT 8 / 21 SBR 3 / 16 RT 9 /10/22 SHLD 4 / 17 SB 11 / 23 R.T.A 5 / 18 SL 12 / 24 R.T.B 6 / 19 SR 13 / 25 R.T.C
0dB
MULTI-PIN LFE SUM
115 V
CD PLAYER
Stereo
Audio Out
R L
Audio Cable
6
6