Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 40)

Page 39
Assuming that the DSS
RECORD setup was followed
as outline under the Record
section of this manual, the
DSS receiver’s analog audio
output has already been con-
nected to the Cinema
Reference’s Analog input #2
as in the diagram. This con-
nection is in addition to the
standard DSS connections in
the Out of the Box setup.
The first step is to now config-
ure the DSS RECORD 8 input
label to track analog input #2.
1 Turn the Input knob until DSS RECORD is seen on the display’s second line and press the
Input knob.
2 Turn the Mode knob clockwise until the display’s second line reads SETUP MENU and press
the Mode knob.
3 Turn the Mode knob clockwise until the display’s second line reads AUDIO INPUTS and press
the Mode knob.
4 Turn the Mode knob counterclockwise until the display’s second line reads ANALOG 2 instead
of ANALOG 8.
5 Press the Mode knob to return the display to read SETUP MENU & AUDIO INPUTS. As we
will be making changes to the video inputs, you need not exit the setup mode yet.
These steps can be used to reassign any input label to either a digital coaxial, optical TOS-Link, or
analog stereo audio input.
Composite Video Input Configuration
To alter an input label’s composite video rear panel connection, one uses the same process as with
the audio jack. Continuing with this example, the DSS receiver’s normal playback input label is as-
signed to Composite Video input #2. The AUXILIARY input label is Out of the Box defaulted to com-
posite video input #8. As such, with the DSS RECORD input label replacing AUXILIARY, we will need
to reassign the video input so that DSS RECORD tracks the same video jack as normal DSS. To do
so, follow these steps (assuming you have not exited the SETUP MENU).
6 Turn the Mode knob clockwise until the display’s second line reads COMPOSITE IN and press
the Mode knob.
7 Turn the Mode knob counterclockwise to change the display from COMPOSITE IN 8 to COM-
POSITE IN 2.
8 Press the Mode knob to return to the previous state where the display reads SETUP MENU &
COMPOSITE IN.
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
7 8
L
R
L
R
L
R
L
R
AUDIO INPUTS
VIDEO INPUTS VIDEO OUT
1
2
3
4
DIGITAL AUDIO
INPUTS
AC INPUT
115V~60Hz/230V~50Hz
AC OUTPUT
10A~ Max Switched
ADA Bus¤
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+ DC 2
1- 2+
WARNING! Risk Of Hazardous Energy! Make Proper Connections. AVERTISSEMENT! Energie Electrique Dangereuse! Faire Des Connexions Propres Pour L’Hautparleur. Voir La Notice De Fonctionnement. CAUTION: Disconnect Supply Cord Before Servicing. ATTENTION: Debrancher Avant Le Depannage.
Use Same Value Fuse 115V~1AS.B.
230V~.5AS.B.
Voltage Selector & Safety Fuse On This Side
115 V
115V 230V
1 2 3
OPTICAL INPUTS
MAIN 2 3 4 1
S-VIDEO INPUTS
8 CHANNEL DB-25 INPUT
REC
SBL LS
RS
L
R
C
SUB SBR
MAIN
4 G ND O UT I N 12V DC
L
R
RECORD
OUT
COMPONENT VIDEO
Y P B P R
Y P B/B-Y P R/R-Y Y P B/B-Y P R/R-Y
O UTPUT
1
2
3
1 13 25 14 PIN POINTS
C INEMA R EFERENCE M ACH II
H OME T HEATER C ONTROLLER
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION! RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR MADE IN U.S.A.
ADA NET“
"Dolby", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,764, 5,974,380, 5,978,762 and other worldwide
patents issued and pending. "DTS", "DTS-ES Extended Surround", and "Neo 6" are trademarks of Digital Theater Systems, Inc. ' 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number
0323830. Other U.S. and foreign patents pending. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd. Surround
EX is a jointly developed technology of THX and Dolby Laboratories, Inc., and is a trademark of Dolby. Used under authorization.
2 3 4 1 PROCESSED VGA ONLY COMPOSITE & S-VIDEO
ARE UP-CONVERTED &
LINE-DOUBLED 115V~60Hz/230V~50Hz
VGASWITCHER
AC VOLTAGE 115V~2/10 A.S.B.
230V~1/10 A.S.B. VGA¥RGBHV¥HDTV INPUTS VGA¥RGB¥HDTV OUTPUT
+10dB
PIN +/- CHAN PIN +/- CHAN 1 / 14 LT 7 / 20 SBL 2 / 15 CT 8 / 21 SBR 3 / 16 RT 9 /10/22 SHLD 4 / 17 SB 11 / 23 R.T.A 5 / 18 SL 12 / 24 R.T.B 6 / 19 SR 13 / 25 R.T.C
0dB MULTI-PIN LFE SUM
115 V
DSS RECEIVER
ANALOG AUDIO RECORDING CONNECTION
(IN ADDITION TO OTHER DIGITAL AUDIO AND VIDEO CONNECTIONS)
Stereo
Audio Out
R L
Audio Cable
2
2