Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 70)

Page 69
External IR Receiver Options
ADA manufactures two different IR receivers that can be connected to the Cinema Reference Mach II.
When using an external IR receiver, ADA recommends turning off (Inactive) the Cinema Reference’s
front panel IR transceiver.
IRT-3000 IR Transceiver
The IRT-3000 is both an IR receiver and emitter (transceiver) much like the front
panel IR transceiver. The IRT-3000 fits a single-gang decora plate and can be
remotely located away from the equipment rack. The IRT-3000 should be wired
with an ADA Bus cable (3 conductor, 18 gauge, tin-coated copper wire, with an
overall braided shield that is a 90% braid - specifically by name, ADA Bus wire).
You can connect the IRT-3000 to the Cinema Reference Mach II directly into the
preamplifier’s rear panel ADA Bus connector. You can also connect the IRT-3000
to an ADA Bus jack on either the WH-2000 or WH-3000, which is then connected to
the Cinema Reference. You can use the IRT-3000 with the IRT-232 and your PC.
As such, if the Cinema Reference is located in an equipment closet away from the
theater room, you can still communicate two-way wireless, from your PC, providing
you aim the IRT-232 (connected to your PC) to the in-wall IRT-3000. ADA also
offers a single-gang metal decora box for IRT-3000’s that are intended to sit on a
bookshelf or cabinet.
1
1
2
2
3
4
3
5
6
4
7
8
5
1
2
6
REC
OSD
7 8
L
R
L
R
L
R
L
R
AUDIO INPUTS
VIDEO INPUTS VIDEO OUT
1
2
3
4
DIGITAL AUDIO
INPUTS
AC INPUT
115V~60Hz/230V~50Hz
AC OUTPUT
10A~ Max Switched
ADA Bus¤
1 2 3 4
DATA PORT
Serial Data
12VDC OUT
100mA Max Per
DC 1
1- 2+ DC 2
1- 2+
WARNING!
Risk Of Hazardous Energy! Make Proper Connections.
AVERTISSEMENT!
Energie Electrique Dangereuse! Faire Des Connexions Propres
Pour L’Hautparleur. Voir La Notice De Fonctionnement.
CAUTION: Disconnect Supply Cord Before Servicing.
ATTENTION: Debrancher Avant Le Depannage.
Use Same
Value Fuse
115V~1AS.B.
230V~.5AS.B.
Voltage
Selector &
Safety Fuse
On This
Side
115 V
115V 230V
1 2 3
OPTICAL INPUTS
MAIN 2 3 4 1
S-VIDEO INPUTS
8 CHANNEL DB-25 INPUT
REC
SBL LS
RS
L
R
C
SUB SBR
MAIN
4 G ND O UT I N 12V DC
L
R
RECORD
OUT
COMPONENT VIDEO
Y P B P R
Y P B/B-Y P R/R-Y Y P B/B-Y P R/R-Y
O UTPUT
1
2
3
1 13
25 14 PIN
POINTS
C INEMA R EFERENCE M ACH II
H OME T HEATER C ONTROLLER
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
ATTENTION! RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR MADE IN U.S.A.
ADA NET“
"Dolby", "Pro Logic", & the double-D Symbol are trademarks of Dolby Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,764, 5,974,380, 5,978,762 and other worldwide
patents issued and pending. "DTS", "DTS-ES Extended Surround", and "Neo 6" are trademarks of Digital Theater Systems, Inc. ' 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
Manufactured under license from Lucasfilm Ltd. U.S. patent numbers 5,043,970; 5,189,703; and/or 5,222,059. European patent number
0323830. Other U.S. and foreign patents pending. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd. Surround
EX is a jointly developed technology of THX and Dolby Laboratories, Inc., and is a trademark of Dolby. Used under authorization.
2 3 4 1 PROCESSED VGA ONLY
COMPOSITE & S-VIDEO
ARE UP-CONVERTED &
LINE-DOUBLED
115V~60Hz/230V~50Hz
VGASWITCHER
AC VOLTAGE
115V~2/10 A.S.B.
230V~1/10 A.S.B. VGA¥RGBHV¥HDTV INPUTS VGA¥RGB¥HDTV OUTPUT
+10dB
PIN +/- CHAN PIN +/- CHAN 1 / 14 LT 7 / 20 SBL 2 / 15 CT 8 / 21 SBR 3 / 16 RT 9 /10/22 SHLD 4 / 17 SB 11 / 23 R.T.A 5 / 18 SL 12 / 24 R.T.B 6 / 19 SR 13 / 25 R.T.C
0dB
MULTI-PIN LFE SUM
115 V
Cinema Reference Mach II
IRT-3000
IR Transceiver
(Single-Gang Decora)