Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 8)

Page 7
PUSH VOLUME
FOR POWER ON
Power On, Mute, Off, & Master Volume Control
Side View
Press Knob
To Turn On
Press Knob
Once To Mute
Press Knob
Twice For Off
Chassis Side
Front Plate
VO
LUME Lo
we
r &
Raise Volu
m
e
When the Cinema Reference is off, turning any knob or pushing any
knob other than the Volume knob will cause the Cinema Reference’s
center LCD display to indicate:
To turn on the Cinema Reference, providing the unit is not in
Mute, press the Volume knob once. Pressing of the Volume
knob performs only three functions.
If the unit is off, pressing it will turn it on.
If the unit is on, pressing it once will engage Mute.
If the unit is in Mute, pressing it again will turn it off.
(To regain the audio (exit Mute), turn the Volume knob).
Once the Cinema Reference
is on, turning the Volume knob
will only raise or lower the
system’s volume level. This
is considered the Master Vol-
ume Control as it will adjust
all eight channels of volume,
maintaining the balance of lev-
els that are preset between
channels.
Power On
Press the Cinema Reference’s
Volume knob to engage power
on.
Mute
While the Cinema Reference is
on, pressing it’s Volume knob
once will mute all channels.
Power Off
While the Cinema Reference is
in Mute, pressing the Volume
knob a second time will turn
the Cinema Reference off.
Un-Mute
While the Cinema Reference is
in Mute, turning the volume
knob, will regain audio.
Power On/Off Via AC Control
If the Cinema Reference is on
when it is unplugged or when
power is removed through the
use of an AC Controller, it will
also automatically turn back
on when power is restored.