Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 9)

Page 8
DVD PLAYER 1
CABLE/TV 5
DVD PLAYER 1
VCR 4
DVD PLAYER 1
DVR/PVR 3
DVD PLAYER 1
DSS 2
DVD PLAYER 1
ALL -24.0 DB
Input Selector
CABLE/TV 5
ALL -24.0 DB
Tu
rn
To
Select Ano
the
r
Front View
INPUT
Co
mponent
Side View
Press Knob
To Activate
The New
Component
Selection
Chassis Side
Front Plate
The Cinema Reference Mach II permits you to scroll to the next
input without having all of the components you are passing actively
process through the Cinema Reference Mach II. This prevents the
clicking that is commonly associated with changing TV channels up
and down. To best access another component from the front of the
Cinema Reference, turn the Input Selector knob. As you turn this
knob, you will notice that the top row of the LCD display will not
change, still indicating the current component in use (in this example,
DVD PLAYER 1). The second line of the LCD display will advance
through the input names until the desired component is displayed.
Once the desired component is dis-
played on the LCD’s second row,
press the Input Selector knob to
engage that component. The dis-
play will then return to read the new
selection (i.e. DSS) along with the
Volume Level.
1. Dial In New Input
Turn the Input Selector knob
until the second line of the
LCD display reads the
component you wish to
select. As you turn the knob,
you will notice that the top
line of the display still
indicates the current source in
play. Also, this component is
still being routed and
processed by the Cinema
Reference.
2. Engage New Input
Once the second line of the
display indicates the next
component you wish to
access, press the Input
Selector knob to engage this
input. This method permits
you to select an input without
switching all of the inputs you
are scrolling through.