Bosch TDS372410E weiß grün Dampfstation Sensixx DS37 ProEnergy - Manual (Page 19)

19
BOSCH
ENGLISH
Cleaning &
Maintenance
Attention! Risk of burns!
Always unplug the appliance from the mains
supply before carrying out any cleaning or
maintenance operation on it.
1. After ironing, pull out the plug and allow the
appliance to cool down before cleaning.
2. Wipe the housing, handle and iron body with a
damp cotton cloth.
3. If the soleplate is soiled with dirt or scale, clean
it with a damp cotton cloth.
4. If the cloth is synthetic, it may melt due to
the high temperature on the soleplate (16).
Switch off the steam and rub off any residue
immediately with a thickly folded, dry cotton
cloth.
5. Never use abrasive products or solvents. To
keep the soleplate (16) smooth, you should
avoid hard contact with metal objects. Never
use a scouring pad, or chemicals to clean the
soleplate.
7
Storing the appliance
1. Set the main power button to the “0” position
(the red light will go off) and disconnect the
mains cable.
2. Always allow the appliance to cool down before
storing it.
3. Place the iron on the iron pad (2), standing on
the soleplate, and fix it by inserting the tip of
the iron into the front slot and moving the lock
lever (11) against the heel of the iron.
4. Empty the water tank, store the mains cable on
the cord storage facility and the steam hose in
the storage fixing. Do not wrap the cords too
tight.
5. Hold the iron´s handle when moving the
appliance, as shown in figure 7.
8
Advice on disposal
Our goods come in optimised packaging. This
basically consists in using non-contaminating
materials which should be handed over to the
local waste disposal service as secondary raw
materials. Your local town council can give you
information about how to dispose of obsolete
appliances.
This appliance is labelled in
accordance with European
Directive 2002/96/EG concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
The guideline determines the framework for
the return and recycling of used appliances
as applicable throughout the EU.
9
Tips to help you save
energy
Steam production consumes the most energy. To
help minimise the energy used, follow the advice
below:
▪ Start by ironing the fabrics that require the
lowest ironing temperature.
▪ Check the recommended ironing temperature
on the label on the garment.
▪ Regulate the steam according to the selected
ironing temperature, following the instructions
in this manual.
▪ Try to Iron the fabrics while they are still damp
and reduce the steam setting. Steam will be
generated from the fabrics rather than the iron.
If you tumble dry your fabrics before ironing
them, set the tumble drier on the ‘iron dry’
programme.
▪ If the fabrics are damp enough, turn off the
steam regulator completely.