Bosch TASSIMO Multi-Getränke-Automat T55 TAS5542 opal black schwarz - Manual (Page 6)

8
Robert Bosch Hausgeräte GmbH
en
Controls and Displays
(see the illustration at the beginning of this
instruction manual)
ON / OFF switch (1)
The ON / OFF switch is the main power
switch for the machine. You use it to turn
on your TASSIMO machine or turn it off
completely.
¡ i
Note:
To save even more energy, the appliance
should be switched off after each use.
Start / Stop button (2)
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes.
Drink adjustment buttons
+ (2a) and - (2b)
You use the drink adjustment buttons
to adjust the size of the drink you are
preparing.
2a Makes a larger / longer drink
(milder flavour)
2b Makes a smaller / shorter drink
(stronger flavour)
+
LED (3a) and
−
LED (3b)
These LEDs light up when the T DISC has
been detected. The
+
and
−
LEDs light up
individually according to whether a bigger
or smaller drink has been selected and
flash during the brewing process.
Status LED
F
(3c)
The Status LED indicates four machine
conditions:
– Steady orange:
Machine is in standby mode
– Blinking orange:
Machine is in the process of brewing a
drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognized)
– Dimmed, orange light:
Power save mode
! Risk of scalding!
Wait until the Status LED
F
(3c) has
stopped blinking before attempting to
open the brewing unit.
Fill water tank
T
(3d)
This indicator lights up when the removable
water tank needs to be refilled or is not in
place.
Descale required
Q
(3e)
This indicator lights up or blinks when your
TASSIMO machine must be descaled.
¡ i
Note:
Always descale your TASSIMO machine in
accordance with the instructions provided
under “Descaling” on page 14.
BRITA filter cartridge replacement
indicator (3f)
This indicator reminds you that it is time to
replace the BRITA MAXTRA filter cartridge
(5d).
TAS55_GB-CH.indb 8 11.01.2013 15:09:53